Tweet
i just bought a shorter serpentine belt so that i could bypass my a/c compressor. now, the tensioner doesn't really make much of a difference tension-wise, so i have to put this thing on without its help. any ideas of how to get this done? i have a 3.4 L, and i bought a 685k6 b/c i saw some other people had used this.
-
i\'m not an ambiturner. -
the question is y, the a/c pulls harldy any power unless the a/c clutch is engaged.
but if its a must sounds like u may need it a bit shorter if the tensioner is not putting on perssure.12.8@110.21 04 srt4, stock computer, stock fuel, stock turbo -
i wanted to do this cuz my compressor sounded like it was going to sieze any minute, and i didn't want it to happen while i was driving. i didn't want to replace the compressor, since i barely ever use my a/c and it should be getting colder anyways. i wound up trying a few different sized belts, but i couldn't find one that fit, so i brought it into my mechanic and he hooked me up with one. i think it something around 69".i\'m not an ambiturner.Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment