fly by wire?

[PARTSGUY]

ok i think i screwed up.how do you hook up the nitrous kit.if there is no throttle cable.

[lilchubby]

Re: fly by wire?

you can buy and eletric full throttle switch. it splices into one of your wires comming from the throttle position sensor. or u could put it on a push button switch and control it urself.

[Shodown]

Re: fly by wire?

Either mount the WOT switch under the gas pedal or get a throttle position sensor (TPS) switch. Here are a few to choose from:

http://www.dynotunenitrous.com/store...?idproduct=105

http://www.nitrousoutlet.com/catalog...del=85&dept=11

There are more out there, but those are the first few I came across. I suggest using a TPS switch instead of ghetto rigging a WOT switch under your gas pedal.

[97rs4life]

Re: fly by wire?

yea you can mount the mechanical WOT switch under the dash so when the gas pedal is pressed to WOT it activates

[PARTSGUY]

Re: fly by wire?

im not to into the gas pedal thing sounds like a pain.i called harris where i got the kit.they have it.its just not on there page.so its on its on the way.thanks guys

[12secondv6]

Re: fly by wire?

Keep us updated on your install.